top of page

Hyperbaric Material Modification System

NO Data Aquisition System

Perfusion pumps (stockert shiley roller pumps)

Add some more info about this item...

  • Multiflow roller pumps

  • Direction of rotation: clockwise and counterclocwise 

  • RPM control range: 4 to 250 RPM

  • RPM display range: 0 to 250 RPM

  • RPM readout accuracy: +/- 0.04

  • LPM display range: 0 to 9.99 LPM

  • pH meter

  • pH Mode: 0.00 to 14.00pH with resolution of 0.01 and accuracy of ±0.01pH

  • Temperature Mode (with ATC probe): 0.0 to 100°C with resolution of 0.1°C and accuracy of 0.3°C

  • mV Mode (S90525, S90527 and S90528 only): -1000.0 to +1000.0 with a resolution of 0.1 and an accuracy of 0.1mV within ±199.9mV; 1mV beyond ±199.9mV

  • mV models also feature recorder output

  • Simple push-button standardization with auto-buffer recognition

  • Icons clearly show current meter status

  • Three-point calibration with percent slope calculation

  • Simple user-interface

  • Pipettes

    Eppendorf Pipette Stands, Carousels and Chargers.

    The pipettes can be attached by the handle, not the nose cone, which eliminates cross contamination from the stand to the pipette. 

    Stirring hotplate and Balance

  • Stirring plate: 

  • Top plate dimensions range from 4" x 4" to 12" x 12"

  • Temperature selection ranges from 41 to 1004F

  • Stirring speeds to 1500 rpm

  • Capacities up to 80 lbs

  • Analytical balance:

  • Dependable mass measurement for solution preparations.  

  • Capacity, 200g; Readability, 0.1mg; Repeatability, 0.1mg; Linearity, 0.3mg;

  • Weighing units: grams, Newtons

  • Simplicity Ultrapure water filter

    The Simplicity system delivers ultrapure (type 1) water from pretreated water (distilled, deionized or reverse osmosis) to laboratories requiring < 5 liters of ultrapure water per day. Applications include preparation of blanks and standard solutions for a variety of analytical procedures. Built-in UV lamp. Dimensions: 14.2" x 11.4" x 20.1" (LxWxH). Operating weight: 18 to 20 lbs. 100 -230V, 50/60Hz.

    Bioreactor flow cell

    The flow cell is a bioreactor system to evaluate blood/biomaterial biocompatibility.

    Regulated gas delivery

    Medical grade oxygen and nitrogen gas delivery lines 

    Innova incubator

    INNOVA 4200 shaker offers a wide temperature range of 5°C above ambient to 80°C.

    Its large viewing window provides clear chamber visibility, minimizing the need to open the door. Its rapid air circulation also produces quick temperature recovery. Moreover, an in-chamber, moisture-proof receptacle secures power for accessories including rockers, rollers, or secondary shakers.

    Please reload

    Microbio Lab

    Fabrication Lab

    EVOS FLoid

    Multi-protocol enabled user-friendly EVOS Floid

    Cell Imaging Station

    Tube revolver

    Tube Revolver can be used in a variety of laboratory fields such as Molecular Biology, Biochemistry, Clinical, and Histochemistry. The rotisseries are interchangeable so that the unit works with a variety of tube sizes. The four rotisserie paddles can be mixed for a combination of different tubes. Each paddle direction can be independently adjusted from 0-90 degrees.



    Thermo Scientific™ GENESYS 10S UV-Vis spectrophotometer utilizes a high-intensity xenon lamp and dual-beam optical geometry to deliver unsurpassed data quality. Firing pulses of light only when the instrument is taking a measurement, the xenon lamp provides strong illumination from the UV to the near-IR region of the spectrum. 

    Purge vessel

    The Sievers Nitric Oxide Analyzer (NOA 280i) and purge system measures nitric oxide and its reaction products, nitrite, nitrate and nitrosothiols, in virtually any biological fluid including: cell culture media, plasma, sera, urine, cerebral-spinal fluid, bronchial-alveolar lavage, perfusates, and tissue homogenates.

    Transonic flowmeter

    The Transonic Tubing Flowmeter Module is used with Flowsensors to measure fluid flow in laboratory tubing.

    Z1 dual threshold coulter counter

    The Z1™ Dual Threshold model is designed for platelet applications and for working with numerous cell types of variable sizes. It incorporates an oil displacement pump which delivers a high degree of accuracy and precision and eliminates the need for mercury. It allows for absolute cell counts or concentration, storage of up to five analysis settings, and a constant current feature which eliminates calibration drift.


    Sievers Nitric Oxide Analyzer

    The Sievers Nitric Oxide Analyzer (NOA 280i) is a detection system for Nitric Oxide (NO) analysis. It uses ozone-chemiluminescence technology to conduct liquid and exhaled breath nitric oxide (NO) measurement. The Sievers NOA can be used to measure liquid samples or exhaled breath samples of nitric oxide.


    Liquid Samples

    The NOA 280i measures nitric oxide, nitrite, nitrate or nitrosothiols in most biological samples. Concentrations, ranging from low nanomolar to millimolar levels, can be measured in sample volumes ranging from a few microliters to several milliliters.

    Exhaled Breath Samples

    Exhaled nitric oxide can easily be measured with the NOA 280i. Fast response time and low sample flow rates allow for measurement of exhaled NO in humans and animals.

    Read more here

    Please reload

    bottom of page